Lacrosse is a fast-paced, physically demanding sport that requires players to be in top shape. One of the most important pieces of equipment for a lacrosse player is their stick, and the mesh that lines it. Over time, dirt, sweat, and other grime can build up on the mesh, causing it to become less effective at holding onto the ball.
In this article, we’ll discuss the steps you can take to clean your lacrosse mesh and keep it in top condition.

Step 1: Remove the Mesh from the Stick
The first step in cleaning your lacrosse mesh is to remove it from the stick. You can do this by loosening the sidewall strings and carefully sliding the mesh off the head of the stick. Be sure to keep track of the sidewall strings and other parts that you remove so that you can put everything back together correctly.
Step 2: Soak the Mesh in Water
Once you’ve removed the mesh from the stick, it’s time to give it a good soak. Fill a bucket or sink with warm water and add a small amount of mild detergent. Place the mesh in the water and allow it to soak for 30 minutes to an hour.
Step 3: Scrub the Mesh
After the mesh has soaked, use a soft-bristled brush to gently scrub away any dirt or grime. Be sure to work in a circular motion, and focus on areas that are particularly dirty. Avoid using harsh brushes or abrasive cleaning products, as these can damage the mesh and reduce its effectiveness.
Step 4: Rinse the Mesh
Once you’ve finished scrubbing the mesh, rinse it thoroughly with clean water. Be sure to get rid of all traces of detergent, as any residue left behind can cause the mesh to become stiff or sticky.
Step 5: Hang the Mesh to Dry
After you’ve rinsed the mesh, gently squeeze out any excess water and hang it up to dry. You can use a clothesline or a hanger, just be sure to avoid exposing the mesh to direct sunlight or high heat, as this can damage the material.
Step 6: Reattach the Mesh to the Stick
Once the mesh is completely dry, it’s time to reattach it to the stick. Thread the sidewall strings back through the mesh and the head of the stick, and tighten them carefully. Be sure to adjust the tension of the mesh as needed, so that it’s not too loose or too tight.
Tips for Maintaining Your Lacrosse Mesh
In addition to cleaning your lacrosse mesh, there are a few other things you can do to keep it in top condition:
Store your stick in a dry, cool place. Moisture and heat can cause the mesh to deteriorate more quickly.
Avoid exposing the mesh to abrasive surfaces, such as concrete or asphalt. These can cause tears or holes in the material.
Check your mesh regularly for signs of wear and tear. If you notice any damage, replace the mesh as soon as possible to avoid further damage.
There are a few additional tips that can help you clean your lacrosse mesh effectively and maintain it in good condition:
Use a specialized lacrosse mesh cleaner: There are some cleaning solutions that are specifically designed for cleaning lacrosse mesh. These solutions can be more effective at removing dirt and grime and can help restore the mesh to its original condition.
Use a mesh scrubber or mesh brush: In addition to a soft-bristled brush, you can also use a specialized mesh scrubber or mesh brush to clean your lacrosse mesh. These tools are designed to clean the mesh without damaging the fibers, and can be especially effective at removing tough stains.
Be gentle when scrubbing the mesh: While it’s important to scrub the mesh to remove dirt and grime, you should also be gentle to avoid damaging the fibers. Use a light touch and work in small circles to avoid pulling or stretching the mesh.
Consider using a mesh protector: If you want to protect your lacrosse mesh from dirt and grime, you can use a mesh protector. These covers are designed to fit over the mesh and can help keep it clean and in good condition.
Clean your stick regularly: In addition to cleaning the mesh, it’s also important to clean your stick regularly. Wipe down the shaft and head of the stick with a damp cloth after each use to remove sweat and dirt, and store the stick in a dry, cool place to prevent damage to the mesh.
By following these tips, you can keep your lacrosse mesh clean and in top condition, and ensure that you’re able to perform your best on the field.
Conclusion
Cleaning your lacrosse mesh is an important part of maintaining your stick and ensuring that you can perform your best on the field. By following these simple steps, you can keep your mesh clean and in top condition, allowing you to play your best game every time. Remember to store your stick properly and check the mesh regularly for signs of wear and tear, so that you can replace it before it becomes a problem.

Lacrosse and Hockey is my passion. This blog will show you these my passion. Just enjoy my blog and Thanks for Reading! Cheer!